Choosing Ceramic Tiles - What to Know
If you are going to buy ceramic tiles for a ceramic tile backsplash, floor tiles, wall tiles or even ceramic tiles for ornamentation there are specific factors to know in choosing which tile is best for your application. Not all tiles are created equal and the differences can determine if your ceramic tiles will hold up to the use you are putting them.
For
example, low fire tiles or tiles that have only been through a bisque firing
are generally less expensive but not nearly as durable as high fired tiles.
Even if the tile has been glazed, it may still have only gone through one
firing and very possibly only a low firing so the fact of it being glossy and colourful
is no indication that the tile has the durability of a high-fired tile. Titan ceramics that has dried but not
been fired, can be glazed with a low fire glaze and fired to a comparatively
low temperature.
Such a
ceramic tile would not be suitable for certain applications. For example if you
intend to use the tile for a backsplash, counter top or tabletop you will need
a very durable tile that will hold up to frequent cleaning and in the case of a
countertop or tabletop, some hard use too. Stoneware clays are the most
suitable for this sort of use. Stoneware is normally fired to about cone 6
(around 2200 degrees F) and is very strong.
But in
your inquiry, don't stop with what kind of clay the tiles are made from. Glazes
vary enormously and even so-called 'food-safe' glazes can leach out chemicals,
stain and lose their colour. Many manufactured tiles are poorly made and will
not hold up to the uses they are marketed for. Of course, there are many quite
excellent manufactured tiles too so you need to inquire to be sure. That
information however may or not be readily available.
The
kind of ornamentation of the ceramic tile is important too. For a ceramic
countertop or tabletop, the tiles should be flat. For a backsplash the tiles
can have low relief but high relief will be difficult to clean and is not
generally advised.
Fireplaces,
murals, mosaics and facades can be either flat, have low relief or high relief
and low fire glazes are OK in these applications. Be careful though with areas
that will get much use, such as around a fireplace where logs will be placed or
fireplace tools will be used. Low fire tiles and glazes can crack or chip much
more easily than stoneware and high fire glazes. Also, if it is an area that
will require frequent cleaning, high relief may prove troublesome.
For
ceramic walls in dry areas not subject to much physical contact most any type
of tile and glaze is adequate. For wet areas flat tiles, low relief tiles or
even high relief tiles can be used so long as they are not in a hazardous place
that a body can inadvertently come into contact with them. A large frog leaping
out from your shower wall at body height is probably not a good idea.
Obviously,
porous tiles are not good for wet areas. So long as the tile is vitreous - has
been fired to maturity such that the crystalline structure is unified - the
tile or glaze is OK, however the joints between the tiles will need to be
sealed. Again, the best bet here is a high fired stoneware tile with a
dependable glaze.
Flooring
presents other challenges, and opportunities. Clearly floor tiles must be
durable so high fire stoneware is the best choice. Any kind of relief is not
advised as uneven surfaces can be difficult to walk on, especially for the
aged. An additional consideration with flooring tiles is slickness. A glossy
glaze on a floor is not recommended. A heavily textured glaze or a matte glaze
is best.
Outdoor
use in cold climates demands high fired tiles and dependable glazes, especially
if on horizontal surfaces. Low fire and even porous tiles can be used outdoors
in cold climates if on or in a vertical surface. But you are still better off
with a frost proof tile in cold climates.
Unfortunately,
the food-safeness of a glazed or hand painted ceramic tile is difficult to
determine unless you can speak with the maker because of the fact that many
glazes said to be food-safe are not. Which is one of the great advantages of
handmade tiles - the ceramic artist can tell you if it is food-safe. Here at
Handmade Ceramics and Fine Art Studios we make our own glazes based on the
recipes tried and tested. If you can't find out whether your ceramic art tile
is OK with food you're better off not using it for that purpose. Use it as a
ceramic wall tile or if it is durable and mostly flat, for a trivet.
Comments
Post a Comment